20″ Threaded Retro Fork
20″ Threaded Retro Fork with 3/8″ dropouts Generic Replacement Style. Fits 10mm or 3/8″ axles.
The threaded Steerer tube is 7 1/4″ long and the threading starts at 3 1/4″ from the crown race and threads up to the top. This is plenty of threading need for most old school BMX frames. The is a tool to help you cut the threaded tube down to size. Its the Park SG-1. It hold the fork steady (you need a Vice) while you but through it with a hack saw. The SE Landing Gear 1″ x 20″ has a 5 1/2″ total steerer tube length just for your reference. The Landing Gear fork weights 1lbs 15.4oz. We also have Haro Threaded 1″ Forks.
•Strong machined CrMo steel upper
•Hi tensile steel legs
•Oversized 1-3/8″ diameter legs
•6mm wide dropout tabs
The fork legs have a little sticker that says SAE 4130 CR-MO TUBE
There is a hole drilled for a front side pull brake.
2lbs and 10.2oz